studio one 4 split ezdrummer separate channels

The drum module is actually what creates the sounds, as the pads and cymbals are just used to trigger these.Ĭheck your drum module.

Option 1) Recording the audio output directly from your drum module via USBĪll of the pads and cymbals on your electronic drum set are routed to your drum module (or drum brain, as it’s also referred as). Option 3) Record your drumming using MIDI.Option 2) Recording the audio output from your drum module via an audio interface.Option 1) Recording the audio output directly from your drum module via USB.To do so you will need a 1/4″ to 1/8″ adapter, and if you’re using the microphone input, then make sure to keep the source volume of your electronic drum set low, otherwise the quality will likely be terrible! However, the sound quality of these can be very poor, particularly the microphone input option. This is to simply connect the audio output of your drums to either the “ line in” or microphone input on your computer (if either of these are present on your computer). There’s also a 4th option which I haven’t explained in detail here. Though please point back to this page when doing so. Feel free to share or re-post this infographic. We’ll dive deeper into these steps after. The same process of recording also applies to most electronic drum pads and drum machines. I recommend using a combination of audio and MIDI as it can give you the most freedom to change and play around with your tracks later. You have a few options available to do this, though you don’t have to choose only one.

One of the biggest benefits of electronic drums over acoustic kits is their ability to be quickly and easily recorded with minimal hassle. In this article, I’m going to tell you in simple terms how to record from your electronic drum set to your computer. For example, I’ve read a guide online stating that you need to buy an external amplifier in order to record your e-drums, claiming that this is what “creates the sounds,” which is completely wrong.

There is a lot of junk information out there about how to do this. I’ve recorded electronic drums many times using different techniques for both professional productions and practice sessions.

Studio one 4 split ezdrummer separate channels